How Effective Are Commercial & Industrial Dehumidifiers?

If you are thinking of buying a commercial & industrial dehumidifier, the very first thing that you are likely to consider is their effectiveness. So, if you have been looking for the answer to how effective commercial dehumidifiers are, you are in the right place.

In this article, we’ll dissect the effectiveness of industrial dehumidifiers under the light of their working principles, use cases, benefits, and varying types.

So, let’s get started.

What is a Commercial & Industrial Dehumidifier?

Industrial or commercial dehumidifiers are larger and more powerful versions of regular dehumidifiers. They regulate the humidity levels of the room and improve the overall air quality.

Commercial & Industrial dehumidifiers are often installed in large spaces, such as warehouses, supermarkets, factories, and water damage restoration houses.

How Does A Commercial Dehumidifier Work?

When it comes to understanding how effective industrial dehumidifiers are, it is important to start with understanding their working process. Argendon commercial dehumidifiers work on the principle of using a fan to pull air into the air and passing it over a cold surface, such as cooling coils. It results in moisture condensation, which drips into a container at the unit’s base. The final step is to reheat the dry air and recirculate it through a fan.

However, there are also desiccant industrial dehumidifiers that work by using a condensing process to eliminate moisture from the air through a chemical attraction. This process involves pulling air into the unit and passing it over a desiccant wheel that is lined with a desiccant material similar to silica gel to suck the moisture.

How Effective Are Commercial and Industrial Dehumidifiers?

When we are discussing the effectiveness of commercial and industrial dehumidifiers, it is not enough to simply say that they are good at removing moisture. It is also important to understand how they are engineered to fully know their working principles.

Here are the key technologies and modes involved in commercial-grade and industrial dehumidifiers:

1. Grain Per Pound (GPP) Mode

Most of the low-end dehumidifiers measure humidity using only relative humidity (RH), which can be quite misleading due to fluctuating temperature. However, industrial dehumidifiers use GPP mode (Grains Per Pound) because it is a much more accurate metric.

GPP measures the exact amount of water vapor in a pound of dry air. This number remains consistent even with changing temperatures. GPP mode is important because it:

• Supports precise control in warehouses and manufacturing
• Delivers consistent quality results, even with fluctuating temperatures
• Ensures quick drying after floods and leaks

Generally, the presence of the GPP mode is the reason why industrial dehumidifiers are more effective than residential models.

2. Continuous Dehumidification Mode

Most of the industrial and commercial environments need a 24/7 moisture control system. This is why a continuous operation mode is available in industrial dehumidifiers to ensure you can operate the unit without manually shutting it off and turning it back on.

The continuous mode is important because it:

• Prevents humidity spikes in warehouses, storage facilities, and other such commercial spaces
• Supports water damage restoration efforts by maintaining the moisture at optimum levels.
• Maintain stable humidity levels and protect the sensitive material and equipment.
• Ensure continuous drainage and pump operation.

3. Low Grain Refrigerant (LGR) Technology

Low Grain Refrigerant (LGR) technology uses a two-stage cooling system and pre-cooling parts to lower the temperature of incoming humid air before it reaches the evaporator coil. This helps the dehumidifier pull more moisture from the air and reach lower humidity levels. LGR units are especially helpful in flood restoration and in situations where steady, reliable drying is needed. They are also generally more energy-efficient and provide consistent performance even in cooler conditions.

4. Super Low Grain Refrigerant (SLGR) Technology

SLGR technology is a more advanced version of LGR. It is built to handle even more complex humidity-related issues. These dehumidifiers have advanced heat exchanger designs with stronger pre-cooling stages to achieve super-low grain levels and achieve dryness conditions that the traditional commercial units cannot achieve.

Click to buy Argendon Sandidry Elite 80C 170-Pint SLGR Dehumidifier with Pump

SLGR is effective for:

• Achieve extremely low humidity levels
• Get stable performance under massive heat load
• Reliable and consistent drying speed
• Ideal option for high-moisture and large-area spaces

Overall, these different modes and technologies of industrial dehumidifiers show that they are highly effective in moisture removal. Whether you want to protect products and equipment or improve indoor air quality, a good-quality commercial dehumidifier can help you achieve those goals.

Factors Affecting the Efficiency of Industrial Dehumidifiers

The following are the key factors that affect the working and efficiency of industrial dehumidifiers:

Humidifier’s Capacity

The size of the dehumidifiers is dependent on the amount of moisture they can remove from the air within 24 hours. This is measured in pints or litres, depending on your region and manufacturers.

When you are buying an industrial dehumidifier, you have to make sure you are choosing the right size that can handle the humidity level of your space, as per its size. A smaller unit will not efficiently work in a large and damp workspace. So, consult the professionals or follow the manufacturer’s guidelines to pick the right capacity.

For example, Argendon XStorm Plus is a commercial & industrial dehumidifier that can remove up to 85 pints of moisture at AHAM conditions and 180 pints at saturation, covering a large space of up to 2,300 sq ft. Whether you choose quality Agrendon products or those from any other manufacturer, you must have clear information about their covered area.

Energy Efficiency

A commercial or industrial dehumidifier is likely to be running 24/7, so you might want to consider the energy efficiency of your model quite closely. The models labelled as energy efficiency are likely to be your first choice. While these are great for controlling electricity bills, you should also consider whether they are optimized for performance or energy saving.

Working Temperature

The working temperature and overall humidity levels of the environment have a deep impact on the efficiency of your industrial dehumidifiers. For example, if you install an undersized dehumidifier in a space with high temperatures and excess moisture, it is likely to be inefficient in properly regulating the humidity levels.

So, it is vital to consider whether you operate in an environment with high or low temperatures, and you choose the right type and model of industrial dehumidifier that can withstand your specific conditions.

Overall, it is important to remember that not every industrial dehumidifier is the same. Similarly, every commercial or industrial space has its own environmental conditions. So, the key thing is to first evaluate your requirements and conditions to narrow down the best models of industrial dehumidifiers that suit your requirements.

Use Cases of Industrial Dehumidifiers

The effectiveness of industrial dehumidifiers can also be understood by their successful use cases in different industries:

• Medical Facilities: Dehumidifiers are an essential part of medical facilities where high humidity levels can damage medical equipment and even have an adverse impact on the precise calibration of such equipment.
• Food Processing Plant: High humidity can promote bacterial growth due to moisture settling down on heavy machinery constantly. With an industrial dehumidifier, you can immediately reduce the humidity levels to eliminate bacterial contamination and ensure smooth production.
• Manufacturing and Electronics: Creating an ultra-dry room is an important use of industrial dehumidifiers for the production of electronics like lithium batteries and semiconductors. They prevent corrosion on metal parts and ensure optimum quality of the machinery.
• Water Damage Restoration: Dehumidifiers are also used to dry out flooded buildings and accelerate the concrete and insulation drying process. It helps create optimum conditions for flooring installation.

Conclusion

As discussed throughout this article, the versatility and benefits of industrial dehumidifiers make them an essential component for a variety of businesses and industries. You can get complete commercial dehumidification packages to achieve the perfect humidity levels in your warehouses, storage facilities, food processing plants, pharmaceutical factories, and any other commercial or industrial space.

The bottom line is that commercial & industrial dehumidifiers are highly effective for moisture control as long as you choose the right type, model, and capacity of the unit as per your space and requirements.